This product is made by use of the best Acrylic resins and is formulated based on the
Final world knowledge .
Some of its properties are very high gloss , excellent gloss retention during the working life , considerable resistance against environmental condition and mechanical stresses as well as scratch resistance , suitable impact resistance , the best adhesion , UV resistance , immersion resistance also fast drying time even in the low temperature .
Before use of this product it must be well mixed with its special hardener . The mixing ratio is 2 : 1 ( by weight or volume ) . At the normal condition , the mix of this clear and its hardener no need to adding any thinner . So without the use of thinner , the ready mix is proper to apply on the each base coats . For achieving the best function it is necessary to apply clear coat in 23 ± 2 °C and 50 ± 5 relative humidity . For complete adhesion , the dry film thickness of base coat must be in the proper range and it can be between 12 microns to 35 microns . ( depends on the density and shade of base coats ) . Flash time between the spraying base coat and clear coat is very important and before tack free , the clear coat must be applied on the base coats . The recommended clear coat thickness is 40 – 50 microns .
Attention : Safety
Use proper ventilation in the applying environment of clear coat . Also use of suitable personal protective equipments like glasses , protective masks , working clothes and gloves are necessary . in the case of skin contact with clear coat , immediately clean the skin and wash it . In the case of contact with the eyes, wash the eyes by abundant of water for at least 15 minutes . Before re use of the infected clothes clean , wash and dry them .
Keep away these products from the children access .